If one of your existing radiators is malfunctioning in some way, or else just out of character with the decor of your home why not replace it with a brand new one? You'll find this job straightforward if you follow our instructions.
There are a number of reasons why you may want to replace an existing radiator in your home's central heating system. These can range from the aesthetic to the purely practical. At one time radiators were ugly and cumbersome, and if you have any still in use like this it's quite likely that they'll clash with the decor of your home. On the practical side, you may well find that a radiator in your system has developed leaks. This will mean both water and heat loss, as well as the inconvenience of cleaning up the mess. And, of course, you may simply feel that a modern radiator would produce more heat, and so improve the comfort in your home. Whatever your reasons for replacing a radiator, you'll have to choose a new one to go in its place, before actually removing the existing one.
Choosing a New Radiator
Modern radiators are usually made of 1.25mm (about l/16 inch) thick pressed steel, and are designed to be space-saving, neat and attractive. For a simple replacement job, size will be among the most important considerations. If the new radiator can be successfully connected to the existing fittings, you won't need to alter or modify the circulating pipes. Consequently, the job will be that much easier. Radiators are available in a wide variety of sizes, ranging in height from 300mm (l2 inch) to 800mm (32 inch) and in length from 480mm (l9 inch) to 3200mm (l0 ft 6 inch) - so you shouldn't have too much difficulty in finding one that will fit into the space left by the old one. Special low, finned radiators are also available. These are usually fitted along the skirting and are both neat and unobtrusive - yet can be turned into decorative features in their own right.
But size isn't the only important consideration. After all, a radiator's job is to provide heat, so you'll have to shop around and find the one which, for its size, will produce most heat. A radiator's heat output is measured in kW - kilowatts - so you should look for the one with the highest kW rating for its size. Remember, it's always possible to turn off a radiator that makes a room too warm, it's far less easy to increase heat output in a room which, with the radiator turned fully on, remains uncomfortably chilly. However, one way of increasing heat output, while retaining the same sized radiator, is to install a double-panel radiator. This is, literally, an ordinary radiator with two panels for the hot water to fill instead of the usual one and therefore has virtually double the heat output. So, while a single panel radiator 675mm x 750mm (27inch x 30inch) will have a heat output of 0.68kW, a double panel one of the same size will be rated at 1.15kW.
Although modern radiators are likely to provide more heat than the older variety, they do have one drawback. Because of the thinness of their metal, they are more prone to internal corrosion and this will ultimately produce leaks.
